Design and Implementation of an HMI-Based Monitoring System  for Automatic Water Purification

Dedi Erawadi; Tri Artono; Muhammad Afif Syahreza; Aggrivina Dwiharzandis; Dytchia Septi Kesuma

doi:10.24036/ijimce.v2i3.89

Authors

Dedi Erawadi Department of Electrical Engineering, Politeknik Negeri Padang,INDONESIA
Tri Artono Department of Electrical Engineering, Politeknik Negeri Padang,INDONESIA
Muhammad Afif Syahreza Department of Electrical Engineering, Politeknik Negeri Padang,INDONESIA
Aggrivina Dwiharzandis Department of Electrical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA
Dytchia Septi Kesuma Department of Electrical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA

DOI:

https://doi.org/10.24036/ijimce.v2i3.89

Keywords:

PLC (Programmable Logic Controller), HMI (Human Machine Interface), Water Purification

Abstract

Water is one of the basic things in human life, even every living thing needs water to survive. But in reality, there are many villages in Indonesia that experience environmental problems, one of which is water pollution. Lack of clean water is a problem in this research. This research aims to find out the design and development of an automatic water purification system based on PLC and HMI, find out how to increase the efficiency of the water purification process through automation, and provide a user interface for monitoring and control of the system. This research method uses the discussion method, literature method, and observation method. Program testing on PLC and HMI-based water purification equipment is using the CX Programmer program and visualization on the CX designer. By using CX Programmer and CX Designer assisted by other PLC and HMI tools or systems, the water purification system can be controlled and monitored automatically. The water purification system can improve the efficiency of the water purification process through the development of CX Programmer and CX Designer programs such as program performance monitoring, process control, data review, analysis and inspection of the system. Integrating CX Programmer and CX Designer through the same observation of each CX Designer object with the instructions in the CX Programmer program created and can involve between CX Designer software installed on a laptop for PL.

References

B. Hartadi, “RANCANG BANGUN POMPA HIDRAULIK RAM (HIDRAM),” AL-JAZARI, vol. 10, no. 1,

Apr. 2025, doi: 10.31602/al-jazari.v10i1.16981.

R. D. Kurniawati, M. H. Kraar, V. N. Amalia, and M. T. Kusaeri, “PENINGKATAN AKSES AIR BERSIH MELALUI SOSIALISASI DAN PENYARINGAN AIR SEDERHANA DESA HAURPUGUR,” JANAYU,

vol. 1, no. 2, pp. 136–143, July 2020, doi: 10.22219/janayu.v1i2.11784.

A. Rahman, “PERMASALAHAN PENCEMARAN AIR YANG TERJADI DILINGKUNGAN,” Oct. 23,

, Open Science Framework. doi: 10.31219/osf.io/p2fhz.

N. F. Salsabila, M. Raharjo, and T. Joko, “Indeks Pencemaran Air Sungai dan Persebaran Penyakit yang Ditularkan Air (Waterborne Diseases): Suatu Kajian Sistematis,” EOHSJ, vol. 4, no. 1, p. 24, Aug. 2023, doi: 10.24853/eohjs.4.1.24-34.

B. Herdiana, E. B. Setiawan, and U. Sartoyo, “Tinjauan Komprehensif Evolusi, Aplikasi, dan Tren Masa Depan Programmable Logic Controllers (A Comprehensive Review of the Evolution, Applications, and Future Trends of Programmable Logic Controllers),” Jurnal Ilmiah Telekomunikasi, Kendali dan Elektronika Terapan, vol. 11, no. 2, pp. 173–193, July 2024, doi: 10.34010/telekontran.v11i2.12896.

K. O. Bachri, Y. P. Karangga, V. W. Mahyastuty, C. O. Sereati, M. Mulyadi, and S. Octaviani, “Perancangan Sistem Filtrasi Air Berbasis Virtual Programmable Logic Controller (PLC) dan Human-Machine Interface (HMI),” Cylinder, vol. 10, no. 2, pp. 25–35, Oct. 2024, doi: 10.25170/cylinder.v10i2.5607.

M. Bryksin, N. Vysotsky, and P. Guseynov, “Industrial HMI design principles for highly automated manufacturing processes,” presented at the 10th International Conference on Human Interaction and Emerging Technologies (IHIET 2023), 2023. doi: 10.54941/ahfe1004043.

X. Liu, “Feature Based Cutting Tool ‘Shape-Performance-Application’ Integrating Design Approach,” JME, vol. 52, no. 11, p. 146, 2016, doi: 10.3901/JME.2016.11.146.

A. F. A. Awalludin, “Monitoring and controlling double carriage elevator system using CX-designer and CX-programmer,” in 2015 IEEE 6th Control and System Graduate Research Colloquium (ICSGRC), Shah Alam, Malaysia: IEEE, Aug. 2015, pp. 151–157. doi: 10.1109/ICSGRC.2015.7412483.

S. U. Abdi, K. Iqbal, and J. Ahmed, “Development of PC-based SCADA training system,” in 2016 IEEE International Conference on Industrial Technology (ICIT), Taipei, Taiwan: IEEE, Mar. 2016, pp. 1192–1197. doi: 10.1109/ICIT.2016.7474923.

“AUTOMATION OF WATER SUPPLYING SYSTEM USING PLC,” IRJMETS, Apr. 2023, doi: 10.56726/IRJMETS35546.

V. Y. Krishna, B. Roshan, J. Kracose Nishanth, P. Anbarasu, and C. Mohan Raj, “Smart Reservoir Navigating Waters with Integrated Automation,” in 2024 10th International Conference on Advanced Computing and Communication Systems (ICACCS), Coimbatore, India: IEEE, Mar. 2024, pp. 86–91. doi: 10.1109/ICACCS60874.2024.10717175.

School of Electrical Engineering, College of Engineering, Universiti Teknologi MARA Cawangan Johor, Kampus Pasir Gudan, Malaysia, R. F. Mustapa, R. Rifin, M. E. Mahadan, and A. Zainuddin, “Interactive Water Level Control System Simulator Based on OMRON CX-Programmer and CX-Designer,” IJETAE, vol. 11, no. 9, pp. 91–99, Sept. 2021, doi: 10.46338/ijetae0921_11.

A. Septian Mn, “Penerapan Trainer Human Machine Interface (HMI) Berbasis CX-Designer Sebagai Media Pembelajaran Programmable Logic Controller (PLC),” JIUP, vol. 3, no. 4, p. 276, Dec. 2018, doi: 10.32493/informatika.v3i4.2391.

M. D. Balsaraf, W. A. Uttam, and M. P. Laxman, “PLC Based Automatic Bottle Filling System,” IJRASET, vol. 12, no. 6, pp. 57–61, June 2024, doi: 10.22214/ijraset.2024.63012.