Conversion of Waste Tyres into High-Energy Fuel Products Using Pyrolysis Technology
DOI:
https://doi.org/10.24036/ijimce.v2i3.71Keywords:
Waste tyres, tyre-derived oil, energy recovery, environmental sustainability, fuel upgradingAbstract
The accumulation of waste tyres poses a critical environmental and public health concern due to their non-biodegradability, complex composition, and fire hazard potential. This study explores the thermochemical valorization of end-of-life tyres into high-energy fuel products through pyrolysis, emphasizing process optimization, product quality assessment, and environmental performance. A fixed-bed pyrolysis system was operated across a temperature range of 350°C to 550°C to evaluate its influence on product distribution and yield characteristics. The maximum oil yield of 52.3% was obtained at 500°C, representing the optimal balance between primary depolymerization and suppression of secondary cracking reactions. The pyrolysis oil exhibited a high heating value (43.6 MJ/kg), suitable for energy applications, but exceeded international standards for sulfur content and viscosity, necessitating upgrading prior to use in transportation fuels. The gaseous fraction, enriched with hydrogen and light hydrocarbons, showed strong potential for process self-sufficiency and co-generation. Solid char demonstrated favorable physicochemical properties for application as a fuel or adsorbent material. Statistical modeling using linear regression accurately predicted oil yield trends, and Aspen Plus® simulations closely aligned with experimental results, validating the process model for scale-up. A comparative life cycle assessment revealed that pyrolysis significantly outperforms incineration in terms of greenhouse gas reduction, energy recovery, and particulate matter emissions. These findings confirm that tyre pyrolysis is a technically feasible and environmentally advantageous approach for sustainable waste management and fuel generation. Further integration with refining technologies and renewable energy inputs is recommended to enhance commercial viability.
References
Kumar, D., Pei, Y., Han, B., Khoo, S. Y., & Norton, M. (2025). Comparative analysis of waste tyre treatment technologies: Environmental and economic perspectives. Renewable and Sustainable Energy Reviews, 178, 113462. https://doi.org/10.1016/j.rser.2024.113462
Liu, X., Li, Z., & Gou, X. Y. (2024). Advances and outlook on desulfurization and utilization of tire pyrolysis oil: A review. Energy & Fuels, 38(4), 6732–6751. https://doi.org/10.1021/acs.energyfuels.4c04244
Jami, M. S., & Alam, M. Z. (2022). Impacts of tyre landfilling on the environment: Global evidence and future research needs. Environmental Science and Pollution Research, 29(34), 51972–51987. https://doi.org/10.1007/s11356-021-17283-9
Taha, M. M., Hasan, S. W., & Ahmad, A. (2020). Waste tyres management: A review of existing methods and the potential of pyrolysis. Renewable and Sustainable Energy Reviews, 127, 109887. https://doi.org/10.1016/j.rser.2020.109887
López, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2020). Thermochemical conversion of waste tyres: A review on pyrolysis process parameters. Journal of Analytical and Applied Pyrolysis, 147, 104797. https://doi.org/10.1016/j.jaap.2020.104797
Zhao, N., Low, S. S., Law, C. L., Wu, T., & Pang, C. H. (2025). Co-pyrolysis of polymers: Recent advances, challenges and perspectives. Fuel Processing Technology, 251, 108111. https://doi.org/10.1016/j.fuproc.2025.108111
Singh, R. K., & Ruj, B. (2021). Recovery of value-added products from waste tyres and their use as fuel and in chemical synthesis. Clean Technologies and Environmental Policy, 23(5), 1583–1595. https://doi.org/10.1007/s10098-021-02059-z
Abbas, A., & Wan, C. (2023). Catalytic pyrolysis of waste tyres: Optimizing reactor design for enhanced fuel recovery. Energy Conversion and Management, 283, 116873. https://doi.org/10.1016/j.enconman.2023.116873
Conesa, J. A., Font, R., & Fullana, A. (2020). Comparative study of the pyrolysis of tyre, plastic and biomass waste using catalysts. Journal of Environmental Chemical Engineering, 8(6), 104532. https://doi.org/10.1016/j.jece.2020.104532
Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2022). Co-pyrolysis of tyres and plastics: Synergistic effects and fuel characteristics. Journal of Analytical and Applied Pyrolysis, 159, 105345. https://doi.org/10.1016/j.jaap.2022.105345
Liu, X., Li, Z., & Gou, X. Y. (2024). Advances and outlook on desulfurization and utilization of tire pyrolysis oil: A review. Energy & Fuels, 38(4), 6732–6751. https://doi.org/10.1021/acs.energyfuels.4c04244
Jung, S.-H., Kim, Y.-M., Kim, D.-H., & Kim, J.-S. (2021). Quality improvement of tyre pyrolysis oil by hydrodesulfurization. Fuel, 286, 119367. https://doi.org/10.1016/j.fuel.2020.119367
Kar, Y. (2023). Life cycle and techno-economic assessment of tyre pyrolysis as an alternative fuel production technology. Sustainable Production and Consumption, 38, 781–793. https://doi.org/10.1016/j.spc.2023.03.014
United Nations. (2021). Sustainable Development Goals Report 2021. United Nations Publications. https://doi.org/10.18356/9789210056083
Williams, Paul T. (2022). Pyrolysis of waste tyres: A review. Waste Management, 138, 275–295. https://doi.org/10.1016/j.wasman.2021.12.004
Kumaravel, Saravanan and Khadir, Nasir A. (2020). Composition and characterization of waste tyres for energy recovery. Fuel, 264, 116809. https://doi.org/10.1016/j.fuel.2019.116809
Mohamed, Salim and Alshamsi, Rashed (2023). Global Waste Tyre Outlook 2023. Environmental Development, 47, 100753.https://doi.org/10.1016/j.envdev.2023.100753
