Development of Betel Nut Splitting Machine

Riza  Muharni; Rudi Kurniawan Arief; Muhammad Fitra; Aggrivina Dwiharzandis

doi:10.24036/ijimce.v1i2.21

Authors

Riza Muharni Departement Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA
Rudi Kurniawan Arief Departement Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA
Muhammad Fitra Departement Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA
Aggrivina Dwiharzandis Departement Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA

DOI:

https://doi.org/10.24036/ijimce.v1i2.21

Keywords:

Betel nut, Areca nut, Cutting machine, Splitting machine

Abstract

The main purpose of this design is to make betel nut splitting machine to obtain maximum and effective production results and reduce the risk of work accidents. The stages in the manufacture of this betel nut splitting machine consist of literature study, tool drawing design, tool and material preparation, tool making and assembly, then testing and analysis stages. Specifications of betel nut splitting machine with a length of 800 mm, width 600 mm, height 1000 mm. Basically, the process in the introduction rotor and the cleavage by the blade is designed in such a way as to fulfill the cleavage function. This machine could produce up to 160kg of betel nut within one hour.

Downloads

Download data is not yet available.

References

A. Sitorus, D. Nugraha, D. Rustamli, M. Muslimin, A. R. Hasan, and R. Bulan, “Design and Construction of a Cutting Machines for Fresh Betel Nut (Areca Catechu Linn),” in 2019 5th International Conference on Computing Engineering and Design (ICCED), 2019, pp. 1–4. doi: 10.1109/ICCED46541.2019.9161115.

N. M. Joy, M. Mathew, K. Jijin, and V. M. Anoop, “Design , Development and Testing of Green Betel Nut Husking Machine,” Int. J. Eng. Innov. Res., vol. 4, no. 5, pp. 686–690, 2015.

R. Krishna, K. V. Prema, and R. Gaongkar, “Areca Nut Disease Dataset Creation and Validation using Machine Learning Techniques based on Weather Parameters,” Eng. Sci., vol. 19, pp. 205–214, 2022, doi: https://dx.doi.org/10.30919/es8d712.

S. Syawaldi, “The Performance Design of Betel Nut Cutter in Rural Areas The Performance Design of Betel Nut Cutter in Rural Areas,” J. Ocean. Mech. Aerosp. -Science Eng., vol. 50, no. 1, pp. 3–7, 2018.

K. Shaik and J. Gunasekar, “PH—Postharvest Technology: Moisture-dependent Physical Properties of Arecanut Kernels,” Biosyst. Eng., vol. 82, pp. 331–338, Jul. 2002, doi: 10.1006/bioe.2002.0079.

K. Kiran, A. K. Govin, M. Bandi, and Shivasharanayya, “Design, Development and Testing of an Areca nut Dehusking Agri-machine,” Int. J. Eng. Res. Appl., vol. 4, no. 7, pp. 109–115, 2014.

B. T. Ramappa, “Economics of Areca nut Cultivation in Karnataka, a Case Study Of Shivamogga District,” J. Agric. Vet. Sci., vol. 3, no. 1, pp. 50–59, 2013.

C. Pradeep and B. V. Raghavendra, “Study and Analysis of Areca-Nut Peeling Process Using Design of Experiment,” Int. J. Eng. Innov. Res., vol. 1, no. 5, pp. 399–406, 2012.

Chamim, M., Leni, D., Rosa, Y., & Hanif, H. (2023). Modeling Mechanical Component Classification Using Support Vector Machine with A Radial Basis Function Kernel. Jurnal Teknik Mesin, 16(2), 165-174.

M. N. Fauzi and Mahaputra, “Rancang Bangun Mesin Pemilah Biji Pinang,” J. Ris. Teknol. Ind., vol. 9, 2015.

R. Bulan et al., “Experimental investigation into the performance of cutting betel nut machine via response surface methodology and desirability function,” Eng. Solid Mech., vol. 10, 2022.

D. Yun, M. Lu, and Z. Chen, “A Quick and Accurate Method to Identify Betel Nut Based on Mobilenetv3,” in The International Conference on Image, Vision and Intelligent Systems (ICIVIS 2021), 2021, pp. 745–756.

N. Srisang, S. Srisang, and T. Chungcharoen, “The Study of the Drying Kinetic and the Cutting Performance in Dried Betel Nut Production Machine,” in ICEAST 2018, 2018, pp. 2–4. doi: https://doi.org/10.1051/matecconf/201819203005.

B. Jarimopas, S. Niamhom, and A. Terdwongworakul, “Development and testing of a husking machine for dry betel nut (Areca Catechu Linn.),” Biosyst. Enginering, vol. 1, no. 2, pp. 83–89, 2009.

C. Sathishkumar, G. Dineshkumar, K. S. Karthikeyan, and P. Prasanna, “Development of Areca Nut Climbing And Harvesting Machine With Pesticide,” in ICMM 2020, 2020, pp. 1–6. doi: doi:10.1088/1757-899X/1059/1/012074.

B. Baboo, “A device for dehusking arecanut,” J. ofAgricultural Eng., vol. 19, no. 1, pp. 63–65, 1981.

R. Rodika, T. Tuparjono, B. Otomo, and R. A. Febryani, “Rancangan Mesin Pembelah Buah Pinang Dengan Dua Mata Potong,” Manutech J. Teknol. Manufaktur, vol. 10, no. 02, pp. 59–63, May 2019, doi: 10.33504/manutech.v10i02.72.

F. Azima, P. Putera, Oktaviyani, R. Zulfani, and R. Hernando, “Rancang Bangun Mesin Pengiris Buah Pinang Muda Tipe Horizontal,” Agroteknika, vol. 1, no. 2, 2018, doi: https://doi.org/10.32530/agtk.v1i2.23.

A. Sitorus, D. Nugraha, D. Rustamli, A. R. Hasan, and R. Bulan, “Design and Construction of a Cutting Machines for Fresh Betel Nut ( Areca Catechu Linn),” pp. 12–15, 2016.

Y. Ernita et al., “Design and Development of Young Areca Nut Slicing Machine,” 2021.