Design of a Rotary Table Hydroponic System for Agricultural Improvement in Limited Urban Land

Predi Maulana Putra; Desmarita  Leni; Muchlisinalahuddin Muchlisinalahuddin; Hendra Hendra; Yuda Perdana  Kusuma

doi:10.24036/ijimce.v1i1.10

Authors

Predi Maulana Putra Departement Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA
Desmarita Leni Departement Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA
Muchlisinalahuddin Muchlisinalahuddin Departement Mechanical Engineering, Universitas Muhammadiyah Sumatera Barat, INDONESIA
Hendra Hendra Departement Mechanical Engineering, Politeknik Negeri Padang, INDONESIA
Yuda Perdana Kusuma Departement Agricultural and Biosystem Engineering, Universitas Andalas, INDONESIA

DOI:

https://doi.org/10.24036/ijimce.v1i1.10

Keywords:

Hidroponics, rotary table, electric motor, frame strength

Abstract

This research focuses on the design of a rotary table hydroponic device for effective, efficient, and space-saving plant growth. With machine dimensions of 1570 x 600 x 2360 mm, a frame made of 2 mm thick 30 x 30 mm galvanized hollow steel, and a 1.5 HP electric motor, the machine is engineered to maximize land utilization in hydroponic methods. Stress analysis on the frame reveals maximum and minimum values of 3,631e+01 MPa and 2,064e-03 MPa, respectively, while the safety factor reaches 1,211e+05 and 6,886e+00, surpassing the safety factor range for static loads. The results of this experiment confirm the effectiveness and safety of the design, demonstrating that this rotary table hydroponic device can be optimally utilized in hydroponic plant cultivation.

Downloads

Download data is not yet available.

References

Y. yetri, Rakiman, N. Ichlas, Hanif, and D. Leni, “PEMBUATAN INSTALASI HIDROPONIK PADA GREEN HOUSE MTsN 7 KOTA PADANG,” Urnal Pengabdi. Kpd. Masy. DEWANTARA, vol. 4, no. 2, pp. 19–27, Sep. 2021.

G. A. Dito, A. Safitri, F. M. Afendi, R. Anisa, A. Salim, and B. Sartono, “Graphical user interface (GUI) for the least absolute shrinkage and selection operator (LASSO) regression,” IOP Conf. Ser. Earth Environ. Sci., vol. 299, no. 1, p. 012031, Jul. 2019, doi: 10.1088/1755-1315/299/1/012031.

O. Sokolenko, “Study of dynamics of lifting technological device constituting a part of underground and tower hydroponic units,” presented at the 13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON AERONAUTICS, AUTOMOTIVE AND RAILWAY ENGINEERING AND TECHNOLOGIES (BulTrans-2021), Sozopol, Bulgaria, 2022, p. 030020. doi: 10.1063/5.0099682.

D. Leni, R. Sumiati, Adriansyah, Fardinal, and H. Jana, “Pelatihan Pembuatan Instalasi Hidroponik Mini Untuk Green House SD Bustanul Ulum Semen Padang Mendukung Program Asean Eco School 2020,” Abdi J. Pengabdi. Dan Pemberdaya. Masy., vol. 4, no. 1, pp. 77–80, Mar. 2022.

N. Bakhtar, V. Chhabria, I. Chougle, H. Vidhrani, and R. Hande, “IoT based Hydroponic Farm,” in 2018 International Conference on Smart Systems and Inventive Technology (ICSSIT), Tirunelveli, India: IEEE, Dec. 2018, pp. 205–209. doi: 10.1109/ICSSIT.2018.8748447.

A. Shotipruk, P. B. Kaufman, and H. Y. Wang, “Conceptual Design of LED-Based Hydroponic Photobioreactor for High-Density Plant Cultivation,” Biotechnol. Prog., vol. 15, no. 6, pp. 1058–1064, Dec. 1999, doi: 10.1021/bp990114i.

W. Atmadja, S. Liawatimena, J. Lukas, E. P. L. Nata, and I. Alexander, “Hydroponic system design with real time OS based on ARM Cortex-M microcontroller,” IOP Conf. Ser. Earth Environ. Sci., vol. 109, p. 012017, Dec. 2017, doi: 10.1088/1755-1315/109/1/012017.